Journal of Tissue Engineering

Manuscript Submission Guidelines: Journal of Tissue Engineering

1. Open Access
2. Article processing charge (APC)
3. Article types
4. Editorial policies
   4.1 Peer Review Policy
   4.2 Authorship
   4.3 Acknowledgments
   4.4 Funding
   4.5 Declaration of conflicting interests
   4.6 Research ethics and patient consent
   4.7 Clinical Trials
   4.8 Reporting guidelines
   4.9 Data
5. Publishing policies
   5.1 Publication ethics
   5.2 Contributor’s publishing agreement
6. Preparing your manuscript
   6.1 Word processing formats
   6.2 Artwork, figures and other graphics
   6.3 Supplementary material
   6.4 Reference style
   6.5 English language editing services
7. Submitting your manuscript
   7.1 ORCID
   7.2 Information require for completing your submission
   7.3 Corresponding author contact details
   7.4 Permissions
8. On acceptance and publication
   8.1 Sage Production
   8.2 Continuous publication
   8.3 Promoting your article
9. Further information

This Journal is a member of the Committee on Publication Ethics

This Journal recommends that authors follow the Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals formulated by the International Committee of Medical Journal Editors (ICMJE).

Please read the guidelines below then visit the journal’s submission site https://mc.manuscriptcentral.com/tej to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned. Remember you can log in to the submission site at any time to check on the progress of your paper through the peer review process.

Only manuscripts of sufficient quality that meet the aims and scope of Journal of Tissue Engineering will be reviewed.

As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you.

1. Open Access

Journal of Tissue Engineering is an open access, peer-reviewed journal. Each article accepted by peer review is made freely available online immediately upon publication, is published under a Creative Commons license and will be hosted online in perpetuity. Publication costs of the journal are covered by the collection of article processing charges which are paid by the funder, institution or author of each manuscript upon acceptance. There is no charge for submitting a paper to the journal.

For general information on open access at Sage please visit the Open Access page or view our Open Access FAQs.

[Return to top]

2. Article processing charge (APC)

If, after peer review, your manuscript is accepted for publication, a one-time article processing charge (APC) is payable. This APC covers the cost of publication and ensures that your article will be freely available online in perpetuity under a Creative Commons licence.

The APC for this journal is $2,650 (+VAT where applicable*).

*The article processing charge (APC) is payable upon acceptance after peer review and is subject to value added tax (VAT) where applicable. If the paying author/institution is based in the European Union, to comply with European law, VAT must be added to the APC. Providing a VAT registration number will allow an institution to avoid paying this tax, except for UK institutions. Payments can be made in GBP or USD.

[Return to top]

3. Article types

The journal will consider original research and review articles for publication. Authors should submit the following:

Title Page: The title page should give the following information: (1) title of the article (in bold), as short and informative as possible, without any abbreviation; (2) one first name, initials (if applicable) and last name of each author; (3) address of the department or institution to which the work should be attributed; (4) name, telephone, fax number and email address of the author responsible for correspondence and to whom the proofs should be sent.

Abstract: This should consist of no more than 150 words summarising the contents of the article. Please do not subdivide, e.g. Background, Aim, Results, Conclusion, or similar. It is important, especially for indexing services, that the abstract should be intelligible without reference to the full text or to literature references. The abstract must stand alone, and it should be presumed that the reader has some knowledge of the subject but has not read the paper.

Main Text (Original Articles): Original Articles should comprise of an Introduction, Background, Aim, Results, Conclusion, Acknowledgements and References or similar. The Introduction should be succinct, with no subheadings.

Main Text (Review Articles): Review Articles should contain a summary, an introduction to the topic, a careful review of the relevant literature, conclusions of the reviewed literature and recommendations, if applicable.

Ethical statements: Mandatory statements for all submissions: All submissions to Journal of Tissue Engineering should include a statement confirming that the submission meets each of the below criteria. In the case of a statement being not applicable, ‘not applicable’ or ‘n/a’ is insufficient, and an explanation must be provided. In these cases the Editors expect to see the details of the Ethics Committee or Review Board that waived approval, including names and institutions of the relevant committee or a brief explanation.  
- Acknowledgements (see section 4.3)
- Authorship (see section 4.2)
- Funding (see section 4.4)
- Availability of data and materials (see section 4.9)
- Conflict of interest (see section 4.5)
- Informed consent (see section 4.6)
- Ethical approval (see section 4.6)
- Human rights (see section 4.6)

Figures will ideally be submitted within the main text of the document, failing this they should be submitted separately and be clearly labelled.

 [Return to top]

4. Editorial policies

4.1 Peer review policy 

Sage does not permit the use of author-suggested (recommended) reviewers at any stage of the submission process, be that through the web-based submission system or other communication. Reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Our policy is that reviewers should not be assigned to a paper if:

•  The reviewer is based at the same institution as any of the co-authors

•  The reviewer is based at the funding body of the paper

•  The author has recommended the reviewer

•  The reviewer has provided a personal (e.g. Gmail/Yahoo/Hotmail) email account and an institutional email account cannot be found after performing a basic Google search (name, department and institution). 

 [Return to top]

4.2 Authorship

Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.

The list of authors should include all those who can legitimately claim authorship. This is all those who:

1. 1. Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
   2. Drafted the article or revised it critically for important intellectual content,
   3. Approved the version to be published,
   4. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.

Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship. Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.

Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.

Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.

Please note that AI chatbots, for example ChatGPT, should not be listed as authors. For more information see the policy on Use of ChatGPT and generative AI tools.

[Return to top]

4.3 Acknowledgements

All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.

4.3.1 Third party submissions

Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:

• Disclose this type of editorial assistance – including the individual’s name, company and level of input
• Identify any entities that paid for this assistance
• Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.

Where appropriate, Sage reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.

4.3.2 Writing assistance

Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance”).

It is not necessary to disclose use of language polishing services.

Any acknowledgements should appear first at the end of your article prior to your Declaration of Conflicting Interests (if applicable), any notes and your References.

[Return to top]

4.4 Funding

Journal of Tissue Engineering requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the Sage Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors. 

[Return to top]

4.5 Declaration of conflicting interests                  

It is the policy of Journal of Tissue Engineering to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.

Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’.

For guidance on conflict of interest statements, please see the ICMJE recommendations.

[Return to top]

4.6 Research ethics and patient consent

Medical research involving human subjects must be conducted according to the World Medical Association Declaration of Helsinki.

Submitted manuscripts should conform to the ICMJE Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals, and all papers reporting animal and/or human studies must state in the methods section that the relevant Ethics Committee or Institutional Review Board provided (or waived) approval. Please ensure that you have provided the full name and institution of the review committee, in addition to the approval number.

For research articles, authors are also required to state in the methods section whether participants provided informed consent and whether the consent was written or verbal.

Information on informed consent to report individual cases or case series should be included in the manuscript text. A statement is required regarding whether written informed consent for patient information and images to be published was provided by the patient(s) or a legally authorized representative.

Please also refer to the ICMJE Recommendations for the Protection of Research Participants

All research involving animals submitted for publication must be approved by an ethics committee with oversight of the facility in which the studies were conducted. The Journal has adopted the ARRIVE guidelines.

[Return to top]

4.7 Clinical trials

Journal of Tissue Engineering endorses the ICMJE requirement that clinical trials are registered in a WHO-approved public trials registry at or before the time of first patient enrolment. However, consistent with the AllTrials campaign, retrospectively registered trials will be considered if the justification for late registration is acceptable. The trial registry name and URL, and registration number must be included at the end of the abstract.

[Return to top]

4.8 Reporting guidelines

The relevant EQUATOR Network reporting guidelines should be followed depending on the type of study. For example, all randomized controlled trials submitted for publication should include a completed CONSORT flow chart as a cited figure and the completed CONSORT checklist should be uploaded with your submission as a supplementary file. Systematic reviews and meta-analyses should include the completed PRISMA flow chart as a cited figure and the completed PRISMA checklist should be uploaded with your submission as a supplementary file. The EQUATOR wizard can help you identify the appropriate guideline.

Other resources can be found at NLM’s Research Reporting Guidelines and Initiatives 

[Return to top]

4.9 Data

Sage acknowledges the importance of research data availability as an integral part of the research and verification process for academic journal articles.

Journal of Tissue Engineering requests all authors submitting any primary data used in their research articles alongside their article submissions to be published in the online version of the journal, or provide detailed information in their articles on how the data can be obtained. This information should include links to third-party data repositories or detailed contact information for third-party data sources. Data available only on an author-maintained website will need to be loaded onto either the journal’s platform or a third-party platform to ensure continuing accessibility. Examples of data types include but are not limited to statistical data files, replication code, text files, audio files, images, videos, appendices, and additional charts and graphs necessary to understand the original research. The editor may consider limited embargoes on proprietary data. The editor can also grant exceptions for data that cannot legally or ethically be released. All data submitted should comply with Institutional or Ethical Review Board requirements and applicable government regulations. For further information, please contact the editorial office at gabriella.anderson@sagepub.co.uk

[Return to top]

5. Publishing policies

5.1 Publication ethics

Sage is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the Sage Author Gateway.

5.1.1 Plagiarism

Journal of Tissue Engineering and Sage take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarized other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.

5.1.2 Prior publication

If material has been previously published, it is not generally acceptable for publication in a Sage journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the Sage Author Gateway or if in doubt, contact the Editor at the address given below.

[Return to top]

5.2 Contributor’s publishing agreement

Before publication Sage requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement.  Journal of Tissue Engineering publishes manuscripts under Creative Commons licenses. The standard license for the journal is Creative Commons by Attribution Non-Commercial (CC BY-NC), which allows others to re-use the work without permission as long as the work is properly referenced and the use is non-commercial. For more information, you are advised to visit Sage's OA licenses page.

Alternative license arrangements are available, for example, to meet particular funder mandates, made at the author’s request.

[Return to top]

6. Preparing your manuscript

6.1 Word processing formats

The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.

[Return to top]

6.2 Artwork, figures and other graphics

For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit Sage’s Manuscript Submission Guidelines

[Return to top]

6.3 Supplementary material

This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplementary files

[Return to top]

6.4 Reference style

Journal of Tissue Engineering adheres to the Sage Vancouver reference style. Please review the guidelines on Sage Vancouver to ensure your manuscript conforms to this reference style.

If you use EndNote to manage references, you can download the Sage Vancouver output file here.

[Return to top]

6.5 English language editing services

Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using Sage Language Services. Visit Sage Language Services on our Journal Author Gateway for further information.

[Return to top]

7. Submitting your manuscript

Journal of Tissue Engineering is hosted on Sage Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit https://mc.manuscriptcentral.com/tej to login and submit your article online.

IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.

7.1 ORCID

As part of our commitment to ensuring an ethical, transparent and fair peer review process Sage is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.

The collection of ORCID IDs from corresponding authors is now part of the submission process of this journal. If you already have an ORCID iD you will be asked to associate that to your submission during the online submission process. We also strongly encourage all co-authors to link their ORCID ID to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. Your ORCID iD will become part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID iD is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.

If you do not already have an ORCID ID please follow this link to create one or visit our ORCID homepage to learn more.

[Return to top]

7.2 Information required for completing your submission

You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).

[Return to top]

7.3 Corresponding author contact details

Provide full contact details for the corresponding author including email, mailing address and telephone numbers. Academic affiliations are required for all co-authors. These details should be presented separately to the main text of the article to facilitate anonymous peer review.

[Return to top]

7.4 Permissions

Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the Sage Author Gateway

[Return to top]

8. On acceptance and publication

If your paper is accepted for publication after peer review, you will first be asked to complete the contributor’s publishing agreement. Once your manuscript files have been check for Sage Production, the corresponding author will be asked to pay the article processing charge (APC) via a payment link. Once the APC has been processed, your article will be prepared for publication and can appear online within an average of 20 days. Please note that no production work will occur on your paper until the APC has been received.

[Return to top]

8.1 Sage Production

Your Sage Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will made available to the corresponding author via our editing portal Sage Edit, or by email to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate.

[Return to top]

8.2 Online publication

One of the many benefits of publishing your research in an open access journal is the speed to publication. With no page count constraints, your article will be published online in a fully citable form with a DOI number as soon as it has completed the production process. At this time it will be completely free to view and download for all.

[Return to top]

8.3 Promoting your article

Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The Sage Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.

[Return to top]

9. Further information

If you are interested in guest editing a Special Collection in Journal of Tissue Engineering please contact the Editor-in-Chief (see below for details).

Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Journal of Tissue Engineering editorial office as follows:

Editor-in-Chief:

Prof Jonathan Knowles

j.knowles@ucl.ac.uk

[Return to top]